Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Kenmore
If your Kenmore garage door is the original steel unit that came with the house, you already know the sound: a heavy grind on the way up, a slam on the way down, and a bottom panel that’s rusting from the inside out. We install new garage doors across Kenmore, and we also fix the legacy doors and openers a lot of local homes still run on. That matters here more than most places, because Kenmore’s older housing stock and lakefront damp put real stress on garage door hardware. Call (844) 725-1599 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For a new door, you’ll get a free measure and a written price before anything is ordered.

Why Kenmore Homeowners Call Kirkland Garage Door Repair Co for Garage Door Installation
We’re a dedicated garage door company, not a general handyman shop or a single-manufacturer dealer. Every technician works only on garage doors, and our technicians have up to 12 years of experience with the systems that show up in Kenmore driveways: LiftMaster and Chamberlain openers, Clopay and Amarr panels, Wayne Dalton doors, and plenty of older Craftsman and Raynor units. We work on Amarr, Wayne Dalton, Craftsman and Raynor systems, and we know them well.
What earns repeat calls around here is knowing what a specific house actually needs. A 1960s rambler near the Sammamish River end of town and a 1990s subdivision house a few streets over have very different doors, very different track condition, and very different parts available. We ask the right questions before we quote, so the price you agree to is the price for your job. Same-day service is available for repairs that can’t wait. Call (844) 725-1599 and we’ll book a free estimate for your installation.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Kenmore
New Door Installation
A full new door installation in Kenmore typically runs $700 – $2,200, depending on size, material, insulation, and whether the track and springs are being replaced with it. For a home with an original 1980s or 1990s steel door, this is often the better call once the bottom panel has pitted and the rollers have seized. We measure the opening, confirm the headroom and spring type, and give you a written price before the door is ordered. Our garage door installation team handles the whole job from tear-out to final balance.
Single Car Door
Single-car garages are common in Kenmore’s mid-century ramblers and smaller split-levels, and they bring their own quirks: tight low-headroom openings, narrow side clearances, and old wooden jambs that swell in wet winters. We match the door to the actual opening rather than forcing a standard size, and we check that the spring is rated for the door’s real weight. A mis-sized spring is the fastest way to burn out a new opener.
Double Car Door
Oversized two-car doors are all over Kenmore’s 1990s and 2000s subdivisions, and they’re heavy. A double door can weigh 150 – 350 lbs, so the springs and opener have to be matched to that load, not guessed at. We size high-cycle torsion springs to the actual door weight and pair them with an opener rated for it, which is what stops the strain that gets mistaken for an opener failure.
Custom Garage Door
Plenty of Kenmore homes sit on sloped lots or under low rooflines, and a stock door won’t sit right. We work with custom sizes, window layouts, and wood or steel finishes so the door fits the opening and the look of the house. If you want to match an existing style on a 1970s split-level or go with something cleaner, we’ll walk through the options and price each one.
Across Kenmore, the door is usually the largest moving object on the property, and it’s the one guests see first. Steel doors are the practical default for most homes here. They hold up to wet winters, come in insulated options, and cost far less to replace than wood when the weather gets to them. Wood doors look great and can be refinished, but they need more attention in a damp climate. We’ll tell you honestly which one fits your house and your budget.
Trusted Brands We Service in Kenmore
We’re factory-familiar with eight major garage door brands, and in Kenmore that usually means Amarr, Wayne Dalton, Craftsman and Raynor hardware on the older homes, plus LiftMaster and Chamberlain openers on newer ones. That range matters when you’re replacing a door on a 1980s house: the old mounting points and track brackets often don’t match a modern door, and knowing the brand tells us what adapter hardware you’ll need. We connect you with local pros who work on these systems, so there’s no guesswork about compatibility. If your door is a brand we don’t list, tell us the make and model and we’ll confirm before we quote.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Kenmore Homes
- Pitted bottom panels and seized rollers on 1980s – 90s steel doors. Year-round moisture works on the bottom edge first, so the door face can look fine from the street while the panel underneath is rusting through. Seized rollers usually show up at the same time, which is why we check both before recommending a repair or a full new door.
- Torsion springs that fail early on north-shore homes. Salt-laden, wind-driven rain off Lake Washington speeds up corrosion on steel tracks, hinges and springs, so hardware that would last years inland can fail sooner here. Corrosion-resistant hardware and renewed weather seals are part of the job, not an add-on.
- Openers straining against heavy double doors. When the springs lose tension, a 150 – 350 lb double door gets hard to lift and the opener takes the load. That strain gets blamed on the opener, but the springs are usually the real problem, and we check them first.
- Wood jambs swelling and sticking in wet winters. Older Kenmore garages with wooden frames can bind a door that used to run smoothly. We check the opening and the seal before sizing a replacement, so the new door doesn’t inherit the same problem.
Pricing for Garage Door Installation in Kenmore, WA
Pricing for garage door work in Kenmore runs on the door and the hardware, not the calendar. A full new door installation typically runs $700 – $2,200. If a door is otherwise sound but needs a section replaced, panel replacement runs $250 – $500, and a new opener installation runs $250 – $550. Those are typical estimated ranges for this area, and the written estimate sets the final price. We quote and agree the price before any work starts, so there’s no invoice bigger than the number you approved.
| Job | Typical estimated range in Kenmore |
|---|---|
| New door installation | $700 – $2,200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
For pricing on repair topics like springs, cables, tracks or rollers, see our garage door installation service page for the full range. Estimates are free.
We Also Serve Cities Near Kenmore
We install and repair garage doors in the towns around Kenmore too: Lake Forest Park, Bothell, Bothell East and Bothell West. If you’re just over the line in one of those, we can help. The same wet-winter conditions and older housing stock show up across the area. You can find more about how we work in Kenmore on our city page, or call and ask about your address.
Serving Kenmore, WA – Our Local Coverage Area
We serve Kenmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Kenmore
Often you can replace just the bottom panel, but only if the tracks, springs and the rest of the door are still sound. Panel replacement runs $250 – $500, which is cheaper than a full new door at $700 – $2,200. If the springs are original and corroding and the rollers are seized, a full replacement usually makes more sense. We’ll look at the whole door and tell you which one is worth it. Call (844) 725-1599 for a free estimate.
Original springs are usually the ones that came with the door on a 1980s or 1990s build, and they often show corrosion, flaking or rust at the coils. Yes, the marine air on Kenmore’s lake side does shorten spring life: salt-laden, wind-driven rain speeds up corrosion, especially on north-shore homes. If your springs look pitted or the door has gotten hard to lift, have them checked before they break. Call (844) 725-1599 and we’ll take a look.
It’s usually a spring issue, not the opener. On a heavy double door, a 150 – 350 lb load is normal, but if the springs have lost tension the opener has to lift that weight itself, which causes the strain. We check the springs first, and only recommend opener repair or installation once we know the door is balanced. Call (844) 725-1599 for a free estimate.
For most attached garages in Kenmore, an insulated steel door in the middle of the R-value range is a sensible choice, with a higher rating worth it if you use the garage as a workspace. We won’t quote a specific number without checking what’s available for your door size and how the garage is used. Summer sun on west-facing doors heats the steel and stresses springs and openers, so higher-cycle springs matter alongside insulation. Call (844) 725-1599 to talk through options.
Sometimes you can retrofit a one-piece door with modern torsion springs and a compatible opener, but it depends on the door’s condition and whether the hardware and parts are still available. If the door is a 1980s or 1990s build with corrosion, pitting and seized rollers, a full replacement is usually the better investment. We’ll assess the door in person, not guess. Call (844) 725-1599 for a free estimate.
When your garage door is the problem, it’s the only problem. Whether you need a new steel door, a double-car replacement, a custom install, or a straight answer on whether your old door is worth saving, we’re ready. Call (844) 725-1599 for a free estimate on garage door installation in Kenmore. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Prices are quoted and agreed before any work starts.
Written by the team at Kirkland Garage Door Repair Co.