Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Kirkland?
Spring replacement in Kirkland typically costs $180-$340 for one spring, and most doors use a matched pair that’s replaced together, which runs about twice that range. The written estimate sets the final price, and it’s free. If your door won’t lift or you heard a loud bang from the garage, call (844) 725-1599 and we’ll get a technician out to confirm what failed before anything is ordered.
Spring Replacement Cost Breakdown (2026)
Here’s what the individual pieces of spring work run in the Kirkland market. These are typical estimated ranges, not a quote. The written estimate sets the final price.
| Item | Typical estimated range |
|---|---|
| Spring repair (one spring only) | $180-$340 |
| Spring repair (matched pair, about double) | roughly 2x the single-spring range |
| Cable repair (often done alongside springs) | $130-$250 |
| Garage door repair (general, if other parts are involved) | $150-$600 |
| Track realignment | $120-$240 |
| Roller replacement | $110-$220 |
| Opener repair (if the opener is the real culprit) | $120-$320 |
| Panel replacement (if a panel bowed when the spring let go) | $250-$500 |
What pushes a spring job toward the top of the range? Mostly the door itself. Heavier doors need heavier-gauge springs, and that costs more. A door with two springs instead of one doubles the parts. If the cables were also stressed when the spring broke, or a panel buckled when the door dropped, those line items stack on top. On the lower end, a single-spring door that comes apart cleanly and goes back together with the cables intact sits right at the bottom. We’d rather tell you that plainly than pad the job.
If you want the deeper walkthrough on how we approach the work itself, see spring replacement.
What Affects Spring Replacement Pricing in Kirkland
- Spring type and size. Torsion springs (the horizontal ones above the door) and extension springs (the ones that run along the sides) are different animals with different parts costs. Torsion is more common on newer Kirkland builds; extension shows up on older doors. We size to your door, not to whatever box is handy.
- One spring or two. A matched pair is the norm on double-wide doors and on doors built with a backup spring. When one breaks, the second is usually at the same wear point, so we’ll tell you honestly whether pairing makes sense. A pair costs about twice one spring.
- Door weight and material. A steel raised-panel door weighs less than a wooden carriage-style door, and the springs that lift it are sized accordingly. Kirkland’s mix of older neighborhoods and newer construction means we see both, and the parts cost tracks the door.
- Condition of the cables and drums. Springs and cables share the load on a torsion system. A snapped spring can leave a cable kinked or a drum out of round, and replacing the spring without addressing those parts just sets up the next failure.
- Brand and opener setup. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so we’re not guessing at what’s installed. A door paired with a smart opener sometimes needs the travel limits reset after a spring swap, and that’s part of the job, not an add-on surprise.
- Access and working clearance. A tight single-car garage with storage stacked under the door tracks takes longer to work around safely. That’s time, and time factors into the estimate.
How to Save on Spring Replacement
The single biggest money-saver is catching the spring before it snaps fully. Watch for these:
- The door feels noticeably heavier when you lift it by hand (test only with the door closed and the opener disconnected, and stop if it feels wrong).
- The door opens a few inches and stops, or the opener strains and reverses.
- You can see a visible gap in a torsion spring coil, or the extension springs look stretched.
- The door sits crooked at rest.
Other ways to keep the number down:
- Bundle the related work. If the cables are also worn, doing them at the same visit avoids a second trip and a second minimum. Ask for one written estimate covering both.
- Replace both springs at once if they’re a pair. One spring now and the other next month usually costs more in total than doing the pair together.
- Get the free estimate in writing before parts are ordered. That locks the line items. Call (844) 725-1599 and we’ll set it up.
What we don’t recommend: buying a spring online and having someone install it. Spring tension is set by the size and the number of turns, and getting that wrong on a door that weighs hundreds of pounds is how people get hurt. It’s also the number one way a “cheap” job turns into a bent door and a bigger bill. This is one of the most commonly botched DIY jobs in the trade, and the tools to do it safely aren’t in a typical home toolbox.
Why Choose Us for Spring Work in Kirkland
We’re a dedicated garage door specialist, not a general handyman shop. Every technician focuses solely on garage door systems, and our technicians have up to 12 years of experience. That matters on spring work specifically, because spring sizing, winding, and door balance all depend on reading the door correctly – and a door that was set up wrong by someone else is common.
We’re factory-familiar with eight major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so whatever is on your Kirkland garage, we’ve worked on the system behind it. Springs, openers, panels, full installs: one call covers it. When a spring lets go and the door won’t open, we treat it as what it is: your garage is probably your front door, and the house is exposed until it’s fixed. Emergency service is real availability here, not a slogan.
The local pro who does the work is licensed and insured as their state requires. If you’re not sure whether you’re dealing with a spring at all, the Kirkland Garage Door Repair Co overview is a good place to start.
What a Spring Replacement Visit Actually Involves
Homeowners ask what the technician is going to do for that hour or two in the garage. Here’s the general shape of it, without the parts you shouldn’t touch yourself.
First, we confirm the diagnosis. A broken torsion spring is usually obvious – a clean gap in the coil. A stretched extension spring or a cable problem can mimic a spring failure, and those price differently. After a spring is confirmed, the technician measures the door (height, width, weight class), checks the track for damage from the drop, and reads the opener’s condition. Then the spring is sized and the door is balanced. Balancing is the step that separates a proper job from a quick one: the door should hold at the halfway point when lifted by hand and come down under control. Cables and drums get inspected while the tension is off. After the new spring is wound to spec, the opener’s travel limits and force settings get checked, particularly on LiftMaster, Chamberlain myQ, and Genie units that store those settings and can misread a door after a spring change. The door gets cycled a few times, and you get the written record of what was done.
Ask to see the old spring and the new one side by side. A reputable tech will show you the size stamp – that’s the proof the part matches the door, and it’s also your record for the next time.
Spring Safety: Why This Isn’t a DIY Job
A garage door spring is under enough tension to lift a door that can weigh several hundred pounds, and it’s stored in a coil that can release that energy in an instant. The winding bars, the correct size, and the knowledge of how many turns go into a specific door are all part of the trade. Without them, a spring swap can seriously injure the person doing it. We’re not going to give a step-by-step for that reason. If you suspect a spring is failing, keep the door closed, unplug the opener if it’s safe to reach the outlet, and call us. A technician will handle the tension side of the job with the right tools.
Two things to check that are safe: whether the door is level when closed, and whether the opener light flashes a code. Those help the technician know what they’re walking into and can save time on the visit.
Can You Fix a Broken Spring the Same Day in Kirkland?
In most cases, yes – same-day spring replacement is routine when the call comes in during dispatch hours. We answer 24/7, and a call outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm. If the spring size isn’t a standard one, the part may need to come in, and the technician will tell you that on arrival rather than leaving you guessing. Call (844) 725-1599.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Kirkland?
Spring replacement in Kirkland typically costs $180-$340 for one spring, and a matched pair usually runs about twice that range because both springs are replaced together. The written estimate sets the final price. Call (844) 725-1599 for a free estimate.
Do I have to replace both springs if only one broke?
Usually yes, because a matched pair wears at the same rate and the second spring is typically at the same fatigue point. Expect a pair to cost roughly twice the single-spring range. If your door has a single spring, this doesn’t apply. Call (844) 725-1599 and we’ll tell you which you have before quoting.
Is it cheaper to repair or replace a garage door spring?
Repairing is almost always the cheaper path – $180-$340 for a single spring versus a new door installation at $700-$2,200. Replacement only makes sense if the door itself is also failing (cracked panels, bent tracks, rusted-through rails). If the door is otherwise sound, spring replacement is the right call. Call (844) 725-1599 for a free estimate.
Can you come today for a broken spring?
Same-day spring replacement is routine when the call comes in during dispatch hours. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Call (844) 725-1599 and we’ll book you into the next opening.
Why is spring replacement more expensive than I expected?
The $180-$340 single-spring range can climb when the door is a matched pair, when cables or drums were damaged in the failure, or when a panel buckled. Those add $130-$250 for cables, $250-$500 for a panel, and $120-$240 for track realignment if needed. A written estimate breaks out every line before work starts. Call (844) 725-1599.
Does the opener need work when the spring is replaced?
Not always, but sometimes – the opener’s travel limits and force settings can misread a door after a spring change, particularly on LiftMaster, Chamberlain myQ, and Genie units. Opener repair, if needed, runs $120-$320. The technician will check it as part of the visit. Call (844) 725-1599.
What brands do you work on for spring replacement?
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and we’re factory-familiar with all eight. For brands outside that list, ask us first. Call (844) 725-1599.
If your spring has let go and the door is stuck, the number to call is (844) 725-1599. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price – no surprises at the end. If you’re weighing the whole picture – springs, opener, door – see our related guide on spring replacement for the deeper detail.
Pricing reflects the Kirkland market as of 2026. Kirkland Garage Door Repair Co offers free estimates – call (844) 725-1599.
Written by the team at Kirkland Garage Door Repair Co.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Shane Meyer"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Doug Novak"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tim Mercer