Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Seattle?
Most garage door repair in Seattle costs between $175 and $710 for typical jobs, with a single broken spring running $210 to $400 and a full new door installation landing between $825 and $2,595. The exact figure depends on what’s broken, the brand of system in your garage, and how quickly the door needs to move again. We answer 24/7 for urgent calls, and the written estimate you get before any work starts is the price you pay.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs run in the Seattle market this year. These are typical estimated ranges for a standard residential door. The written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Garage door repair (general) | $175 – $710 |
| Spring repair (one spring) | $210 – $400 |
| Cable repair | $155 – $295 |
| Opener repair | $140 – $380 |
| Opener installation | $295 – $650 |
| Panel replacement | $295 – $590 |
| Track realignment | $140 – $285 |
| Roller replacement | $130 – $260 |
| New door installation | $825 – $2,595 |
One note on springs: the $210 – $400 range is for a single spring. Most doors run a matched pair that’s replaced together, so a pair costs about twice that range. We’ll tell you straight which springs your door has and what the pair runs before we start.
What pushes a job toward the top of its range? Heavy insulated doors, a snapped torsion spring on a double-wide door, opener logic boards on older LiftMaster or Craftsman units, and panels that have to be ordered to match a discontinued Clopay or Amarr color. A single roller or a track knocked out of alignment usually sits near the bottom.
What Affects Garage Door Pricing in Seattle
- Door size and weight. A single-car door with a light steel skin costs less to work on than a double-car insulated door. Heavier doors need heavier springs, and spring pricing tracks with what the door actually weighs.
- The brand on your wall. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and we know them well. Knowing the specific unit cuts diagnostic time and gets the right part faster. A generic shop with a toolkit guesses; that costs you more in the end.
- Age of the opener. A modern Chamberlain myQ or LiftMaster unit usually takes a logic board or a gear swap. A legacy Genie from decades back may take a part that’s harder to source. Both are repairable, but the ranges differ.
- Seattle’s wet half of the year. From October through April the region sees steady rain and long damp stretches. That humidity works its way into hinges, rollers, and steel door skins. Wood-look composite doors and untreated steel panels show the wear first, and rollers that rust seize and wear tracks faster. A door that gets annual attention holds its alignment through the wet season; one that doesn’t comes out of spring needing more work.
- Hills and older housing stock. Plenty of Seattle homes sit on slopes with tight garages, carports, or doors that open onto alleys in neighborhoods like Ballard, Beacon Hill, and West Seattle. Tight clearances and low headroom take more time to work in, and time is part of the estimate.
- Emergency timing. A door that won’t close and leaves the house open gets priority in the schedule. We answer 24/7 when the door fails, and fast dispatch from 7am to 7pm gets a technician out to you. The price of the repair itself is set per job by the written estimate.
Repair or Replace?
A repair makes sense when the door structure is sound and one component has failed: a spring, a cable, an opener, a bent track. A replacement makes more sense when the door has widespread panel damage, a rusted frame, or an opener so old that parts are getting scarce. The rough math: a repair at $175 to $710 stays well under a new door at $825 to $2,595, so if the panels and frame are solid, fix it. If you’re facing three separate repairs on a door that’s already worn, replacement usually wins.
We’ll give you both numbers in the same visit when the call is close. No pressure to pick one over the other. The right fix for your brand, your door, your situation is the one that keeps the door moving for years to come.
What a Typical Garage Door Job Involves in Seattle
Most service calls follow the same shape. A technician arrives, tests the door by hand and by opener, and confirms what’s actually failing. Then you get the written estimate. If you approve, the work happens on the spot for most repairs. Spring and cable work always involves the torsion system, which is the dangerous part of any garage door, so we handle it with the right winding bars and safety protocols rather than a homeowner’s socket set. Panels and openers can take a second visit if a matching color or a specific unit has to be ordered.
For a full new door installation, the sequence runs longer. We measure the opening, check the headroom and side clearance, and talk through the door style and the opener that goes with it. Installation day includes removing the old door, setting the new tracks and springs, hanging the panels, and dialing in the opener travel and force limits. On a slope-side Seattle garage, that measurement step matters as much as the installation itself.
Springs, openers, panels, and full installs all come through one company. When your garage door is the problem, it’s the only problem, and one call covers it.
How to Save on Garage Door Costs
- Get the free estimate in writing. An itemized quote tells you which line items are driving the price. Call (844) 725-1599 and we’ll walk through it.
- Catch small problems early. A roller that’s worn flat or a track with a slight bend costs $130 to $285 to fix. Left alone, it wears the door and the opener, and the bill grows.
- Repair the opener instead of replacing it when it makes sense. Opener repair runs $140 to $380. Opener installation runs $295 to $650. If the motor and logic board are sound, repair almost always wins.
- Replace springs in pairs. If one spring of a matched pair has snapped, the other is at the same age and load. Replacing both together avoids paying for two separate visits.
- Keep the door balanced. A door that lifts smoothly by hand puts less strain on the opener. If it feels heavy or drops when you let go halfway up, call us before the opener fails too.
- Ask about the brand-specific part. Because we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor units regularly, you’re less likely to pay for a part that has to be ordered and returned.
When to Call a Professional
Springs and cables are the two components we tell every homeowner to leave alone. A torsion spring under load holds enough stored energy to cause serious injury, and a snapped cable can whip. If you hear a loud bang from the garage and the door won’t lift, that’s a spring failure, and it’s a call, not a project. Same with a door that’s jumped its tracks or is hanging crooked from one side. Those aren’t handyman jobs. They’re garage door jobs, and the right tools and protocols matter.
Openers and panels are safer to inspect yourself, but a door that reverses randomly, an opener that hums without moving the door, or a photo-eye that won’t line up are all quick fixes for a technician and slow, frustrating ones for a homeowner with a manual.
Why Choose a Dedicated Garage Door Company
We’re a garage door specialist, not a general home-services shop. Every technician works solely on garage door systems, which means the diagnosis is direct and the repair is done right the first time. Our technicians have up to 12 years of experience. That focus is the difference between a shop that has seen your exact opener model a hundred times and one that’s reading the manual alongside you.
We handle the full range in-house: repair, opener service, spring replacement, and complete new door installation. No handing you off to a second contractor for the install. And when a door fails and the house won’t secure, we’re set up for same-day repair because a broken door doesn’t wait. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For a broader look at what we cover, see Kirkland Garage Door Repair Co.
FAQs – Garage Door Cost in Seattle
How much does garage door repair cost in Seattle?
Garage door repair in Seattle typically runs $175 to $710, depending on the component that failed. Spring repair sits at $210 to $400 for one spring, and cable repair at $155 to $295. The written estimate sets the final price. Call (844) 725-1599 for a free estimate.
How much does a new garage door cost in Seattle?
New door installation in Seattle typically runs $825 to $2,595, with the range driven by door size, insulation, and material. A single-car steel door sits near the bottom; a double-car insulated door with a matched opener sits near the top. Call (844) 725-1599 for an exact quote on your opening.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper when the door panels and frame are sound. A repair at $175 to $710 stays well under a new door at $825 to $2,595. Replacement makes more sense when the door has widespread panel damage or multiple failures stacking up. Call (844) 725-1599 and we’ll price both.
How much does opener repair or installation cost in Seattle?
Opener repair in Seattle runs $140 to $380, and opener installation runs $295 to $650. Repair is the better call when the motor and logic board are still good. We service LiftMaster, Chamberlain, Genie, and Craftsman units, including older legacy models. Call (844) 725-1599 to book a free estimate.
Can you come the same day?
Same-day repair is usually possible for urgent calls, and we answer 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 725-1599 and we’ll book you into the next opening.
Do you charge for the estimate?
No. Estimates are free, and the price is set per job by the written estimate before any work begins. Call (844) 725-1599 to schedule yours.
Related Pages
- garage door repair in Seattle
- garage door spring repair in Seattle
- garage door opener repair in Seattle
- garage door installation in Seattle
- emergency garage door service in Seattle
- garage door repair in Kirkland
- garage door repair in Bellevue
- garage door repair in Redmond
- garage door spring repair cost guide
- garage door opener repair cost guide
- how to choose a garage door company
Get a Free Estimate
When the door won’t move, the price shouldn’t be a surprise. Call (844) 725-1599 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Tell us what the door is doing and we’ll tell you what the fix runs.
Pricing reflects the Seattle market as of 2026. Kirkland Garage Door Repair Co offers free estimates – call (844) 725-1599.
Written by the team at Kirkland Garage Door Repair Co.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Shane Meyer"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Doug Novak"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tim Mercer