Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Seattle
If you’re planning a new garage door in Seattle, you’re likely choosing between a standard sectional replacement and something built to fit an older, non-standard opening. Typical new door installation here runs $825 to $2,595, with the written estimate setting the final price. We connect you with independent local garage door professionals who know this city’s hills, its wet weather, and its older housing stock, because a door that has to work on a steep Queen Anne lot is a different job than one on a flat lot in Shoreline. To start, call (844) 725-1599. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways
- New door installation in Seattle typically runs $825 to $2,595, quoted in writing before work begins.
- Many Seattle garages sit at street level on steep slopes, so the opener and spring system carry real safety weight.
- Older Craftsman bungalows and post-war ranches often have single-car, non-standard openings that need custom-fit doors.
- Rain and humidity warp wood doors and feed moss on tracks, so material choice matters here more than in drier cities.
- We work on Clopay, Amarr, Wayne Dalton, and Craftsman systems, among others, so matching new hardware to what’s already installed is straightforward.
Why Seattle Homeowners Call Kirkland Garage Door Repair Co for Garage Door Installation
We’re a dedicated garage door specialist, not a general handyman operation, and that focus shows when a job needs precision. Homeowners across Seattle reach out because they want someone who has installed carriage-house doors, matched custom finishes, and paired smart openers with the right spring ratings, not someone learning on their door. Our technicians have up to 12 years of experience, and they work on the brands you’re most likely to have: Clopay, Amarr, Wayne Dalton, and Craftsman among the eight major systems we handle.
Response time to Seattle matters here. We connect you with local professionals who serve neighborhoods from Magnolia to the Rainier Valley, so getting a measure scheduled doesn’t mean waiting on a crew driving in from another county. The local knowledge runs deeper than geography. A door in 98118 sits in a different climate and housing context than one in 98125, and the installation plan should reflect that. That’s why homeowners planning a garage door installation often start by asking us what their specific opening can actually take.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Seattle
New Door Installation
A full new door installation in Seattle starts with measuring the opening, not reaching for a catalog. Older attached garages frequently have dimensions that don’t match standard sectional specs, and a pro who measures carefully saves you from panels that almost fit. We match the door to your opening, your home’s style, and the weather it has to survive.
Single Car Door
Most of the older Craftsman bungalows and post-war ranchers around Seattle have single-car openings, and many of those openings are non-standard. That means an off-the-shelf door often won’t sit right without custom-fit panels or adjusted hardware. We size and fit single doors to the actual opening rather than forcing a standard unit into a space it wasn’t built for.
Double Car Door
A double-car door on a Seattle hillside lot adds weight and width to a system that may already be carrying lateral loads from the slope. The springs have to be rated for the door’s real weight, and the opener has to match that rating without straining. We check track alignment and balance before anything gets bolted down.
Custom Garage Door
Custom work is where Seattle’s high-end homes ask the most. Carriage-house styles, wood finishes, and matched hardware all need precision, and a door that looks right but runs rough is a failed install. We pair custom doors with whisper-quiet opener rails and springs spec’d to the door, then test the whole system before we call it done.
Trusted Brands We Service in Seattle
We’re factory-familiar with the major systems you’re most likely to have or want: Clopay, Amarr, Wayne Dalton, Craftsman, LiftMaster, Chamberlain, Genie, and Raynor. That familiarity means no guesswork about how a door hangs, how its springs are rated, or which opener pairs cleanly with it. We don’t stock parts locally or run a warehouse, so if your job needs a specific panel or hardware set, we order it to the job and schedule around the delivery. That’s how a custom install stays precise instead of improvised. No brand confusion, no mismatched components, just the right parts fitted to your door.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Seattle Homes
- Street-level openings on steep lots. Hillside properties put the garage door at street level, where it faces lateral loads a flat-lot door never sees. A failed spring on that door can let a car roll down a slope, so backup battery systems and tested photo-eye sensors aren’t optional extras here.
- Non-standard openings in older homes. Early-20th-century Craftsman bungalows and post-war ranchers often have single-car openings that don’t match modern sectional dimensions. Off-the-shelf doors won’t fit, and the install needs custom-fit panels and matched hardware.
- Wood doors swelling in the rain. Seattle’s persistent moisture causes wooden doors to swell and warp over time. We steer homeowners toward moisture-resistant materials and finishes that hold up to a wet climate, and we recommend regular lubrication to keep the hardware moving freely.
- Moss and algae on tracks and panels. The damp air feeds growth on door surfaces and in the track channels year-round. Cleaning becomes part of routine upkeep, and the right finish and hardware choices reduce how often you have to deal with it.
Pricing for Garage Door Installation in Seattle, WA
Here’s what installation and the related work typically cost in Seattle. These are estimated ranges, and your written estimate sets the final price.

| Service | Typical Seattle Range |
|---|---|
| New Door Installation | $825 – $2,595 |
| Opener Installation | $295 – $650 |
| Garage Door Repair | $175 – $710 |
| Spring Repair (one spring) | $210 – $400 |
What moves the number: door size, material, whether the opening is standard or custom, and whether the opener needs replacing alongside the door. A custom wood carriage-house door sits at the higher end; a standard single steel door sits lower. A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range above. Whatever the scope, the price is quoted and agreed before any work starts, and the estimate is free. Call (844) 725-1599 for an exact quote.
We Also Serve Cities Near Seattle
We connect homeowners with garage door professionals across the Seattle area, including Bellevue, Kirkland, Shoreline, and Lake Forest Park. If your home sits on a hillside lot or has an older non-standard opening, the same care applies whether you’re inside Seattle or just over the city line. Call (844) 725-1599 to schedule a measure and a written estimate.
Serving Seattle, WA – Our Local Coverage Area
We serve Seattle and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Seattle
For Seattle’s wet climate, steel is usually the lower-maintenance choice, while wood needs a moisture-resistant finish and more regular care to keep it from swelling and warping. Wood gives you the custom look many older Craftsman homes call for, but it asks more of you over the years. We’ll walk you through the trade-off for your specific home. Call (844) 725-1599 for a free estimate.
Expect the installer to account for lateral loads and to pair the door with a spring system rated to carry its weight safely on that slope. Street-level openings on hillside lots are common in Seattle, and a failed spring there can let a car roll away. A qualified pro will add backup battery systems and tested photo-eye sensors as part of a proper install. Call (844) 725-1599 to schedule a measure.
Torsion springs mount above the door on a shaft and handle heavier doors more smoothly, while extension springs run along the sides and suit lighter, single-car doors. If you’re replacing springs with a new door, the type should match the door’s weight and the opening’s layout. A pro verifies the rating rather than guessing. Call (844) 725-1599 for an exact quote.
A straining opener usually means the spring rating doesn’t match the door’s actual weight, or the track isn’t aligned and the door is fighting its own path. New doors can be heavier or differently balanced than the one they replaced, and the opener has to match. A pro will rebalance the door and check alignment before blaming the opener. Call (844) 725-1599 for a free estimate.
Often no. Many Seattle Craftsman bungalows and post-war ranches have single-car, non-standard openings, so an off-the-shelf sectional won’t fit without custom-fit panels or adjusted hardware. The right approach starts with measuring the actual opening. Call (844) 725-1599 and we’ll book a measure and a written estimate.
Whether you’re replacing a worn single door in Seattle or planning a custom carriage-house install on a hillside lot, the first step is a measure and a written estimate. Call (844) 725-1599 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll help you match the right door, opener, and spring system to your home, and the price is agreed before any work begins.
Written by the team at Kirkland Garage Door Repair Co.